Acessories
-
(5 Pairs) Amass XT90 Connectors Male / Female With End Cap
$9.99Original price was: $9.99.$8.59Current price is: $8.59. -
(5 Pairs) EC5 Bullet Banana Plug Connector Female Male 5mm Bullet Gold Connector
$9.99Original price was: $9.99.$7.20Current price is: $7.20. - 15cm Servo Lead Extension (Futaba) 26AWG (5pcs/set) $1.99
- (5 Pairs )T-Plug Connectors Male & Female Deans Style w/Shrink Tubing for RC LiPo Battery Pack ESC Electric Engine Motor Parts $3.20
-
(5 Pairs) Amass XT60 Connectors Male/Female
$6.99Original price was: $6.99.$4.59Current price is: $4.59.
JETCENTRAL LYNX 130 SE SERIES 29LBS THRUST
$2,695.00
- Thrust: 130 Newtons (29.22 lbs) @ 130,000 RPM
- Idle Thrust: 4.2 Newtons (0.94 lbs) @ 35,000 RPM
- RPM Range: 35,000 – 130,000
- Weight: 1.29 kg (2.84 lbs)
- Diameter: 99 mm (3.9 in)
- Length: 229 mm (9.02 in)
- Exhaust Gas Temperature: 500º C – 700º C
- Fuel Consumption: 365.5 g/min (0.43 lt/min) (15.13 oz/min) @ 130,000 RPM
$64.00 Flat Rate Shipping
The Jet Central turbines are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.
- “SE” Smart Electronics ECU System
- Metallic robust HDT
- Safety acceleration flameout prevention
- Self-adjusting features
- Easy fine tuning, do more with less adjustment
- Simple, graphic navigation menus
- Keep track of your telemetry with an easy to use interface
- One-click altitude compensations
- All the information you need in an easy to read display
- Kerosene Start
- Engine ready for installation, with the newest in ECU’s.
- All motors tested at over 6000 ft.
WHAT’S IN THE BOX: Turbine Engine with integrated ECU, Hard Case, SE POWERPACK Unit, Clear Fuel Line 4mm, Clear Kerosene Start Line 3mm, Clear Fuel Line 6mm, ECU Battery, Accessory Box (On/Off Manual Festo Valve (6mm.), Hanger 9 Fuel Filter, S-Bus / Power Cable, USB Flash with Manuals, SE Hand Data Terminal (HDT), JR Style Receiver throttle cable)
Weight | 1000 kg |
---|
Related products
-
Sale!
JETCENTRAL MAMMOTH 250 SE TURBINE ENGINE, 56 LBS THRUST
$4,795.00Original price was: $4,795.00.$4,595.00Current price is: $4,595.00.Add to cart- Thurst: 250 Newtons. 25.49 kg – 56. (lbs)
- Idle Thrust: 0.82 kg (1.8 lbs) @ 28,000 RPM
- RPM Range: 28,000 – 108,000 RPM
- Weight: 2.28 Kg (5.02 Lbs) with starter
- Diameter: 124.1 mm (4.89 in)
- Length: 325.40 mm (12.81 in)
- Exhaust Temperature: 500ºC – 700ºC
- Fuel Consumption: 0,81 Lt/min (28.51 oz/min) @ 104,000 RPM
$64.00 Flat Rate Shipping
-
Sale!
JETCENTRAL RHINO 200 SE TURBINE ENGINE, 45 LBS THRUST
$3,695.00Original price was: $3,695.00.$3,450.00Current price is: $3,450.00.Add to cart- Thrust: 200 Newtons. 20.4 KG (45 Lb) @121,000 RPM
- Idle Thrust: 0.6K (1.33 Lbs) @ 32000 RPM
- RPM Range: 32,000 – 121,000
- Weight: 1.780 KG (3.9 Lbs)
- Diameter: 111 mm (4.4 in)
- Length: 302 mm (11.9 in)
- Exhaust Gas Temperature: 500ºC – 750ºC (932º F – 1292ºF)
- Fuel Consumption: 0.55 lt/min (19.5 oz/min) @ 121,000RPM
$64.00 Flat Rate Shipping
-
Sale!
JETCENTRAL RABBIT 100 SE TURBINE ENGINE, 24 LBS THRUST
$2,795.00Original price was: $2,795.00.$2,395.00Current price is: $2,395.00.Add to cart- Thrust: 100 Newtons, 10.20 kg (22.48 lbs) @ 152,000 RPM
- Idle Thrust: 0.4 kg (0.90 lbs)
- RPM Range: 42,000 – 152,000
- Weight: 1.0 kg (2.20 lbs) with starter
- Diameter: 91 mm (3.58 in)
- Length: 228 mm (8.98 in) with starter
- Exhaust Gas Temperature: 500º C – 700º C
- Fuel Consumption: 0.36 lt/min (12.67 oz/min) @ 152,000 RPM
$64.00 Flat Rate Shipping
-
JETCENTRAL HORNET 85 SE SERIES TURBINE ENGINE – 19 LBS THRUST
$2,350.00Add to cart- Thrust: 8.67 kg (19 lbs) @ 182,000 RPM
- Idle Thrust: 0.38 kg (0.8 lbs)
- RPM Range: 55,000 – 182,000
- Weight: 0.820 kg (1.81 lbs) with starter
- Diameter: 82 mm (3.228 in)
- Length: 205 mm (8.07 in) with starter
- Exhaust Gas Temperature: 500º C – 700º C (932ª F – 1292ª F)
- Fuel Consumption: 0.338 lt/min (11.90 oz/min)
- Maintenance Cycle: 25 hours
$64.00 Flat Rate Shipping
Reviews
There are no reviews yet.