Pilot RC Viperjet 3m ARF or PNP

A 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.

Email us at support@powerboltrc.com for a QUOTE today

Shipping quote included

FEATURES:

Full composite construction, lightweight and strong
Removable two piece fuselage, the tailpipe mounts only on the rear fuselage section, allowing for easy removal and transport.
Removable rudder, two piece wing and two piece stabilizer all for easy transport
Painted outside the mold so no seam lines
Pre-installed tubes for servo extension leads
Servo operated nose gear door. Mains attached direct to struts.

INCLUDED HARDWARE:

Complete air frame (including carbon wing-tubes and fibreglass control horns)
Pilot-RC electric retracts and electric brakes
Scale cockpit (minus pilot)
Dual wall tail pipe (for 160-310N turbines)
2in1 tank. 4.7L main + 1.5L smoke. Includes fuel tubing pre-prepared, fuel dot and breather valve
Aluminium air trap UAT
Pre-prepared pushrods with ball links

Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, servo extension leads and navigation lights, all pre-installed and with free wing bags. Just add your own turbine of choice.

Viperjets are synonymous for a great flying jet, and this one really fullfils with expectations. Fast, slow, scale, acrobatic, fun, easy, it simply ticks all the boxes for your next jet!

SPECIFICATIONS:

Model:	Viperjet MkII 3.0
Wingspan:	130″ (3,260mm)
Length:	118″ (3,000mm)
Wing area:
Weight:	48.2lbs (21.9kg) – without fuel

REQUIRED HARDWARE:

Turbine: 160-310N

Servos: 9 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder, x1 for nose gear door and x1 for steering. Rudder and Flap servos are recommended to be +27kg)

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

PILOT-RC RECOMMENDED HARDWARE:

Servos:Pilot-Rc PW27AH (27Kg – 0,119s at 8,4v) or
Servos:Pilot-Rc PW38AH (38Kg – 0,129s at 8.4v) or
Servos:Pilot-Rc PY20AH (22Kg – 0,12s at 8,4v)
Servo arms: Pilot-RC 1.2″ and 1.6″ Aluminum arms (included with Pilot-Rc servos), and 0.8″ for Flaps and Steering.

Simple Servo Adjuster – Use single channel for gear and doors

BUILD INFO:

CENTER OF GRAVITY:
185mm

CONTROL THROWS
Aileron: 9mm
Elevator: 15mm
Rudder:17mm
Flap: 57mm for landing , 25mm for take off

COLOUR SCHEMES AVAILABLE:

Please note that schemes and logos may vary depending on country of delivery. Always check with your local dealer to confirm what logos are included in your area.

Any logos included at time of shipping are stickers, not paint.

Colour scheme 01 – Red, Black, White: