Acessories
-
(5 Pairs) Amass XT90 Connectors Male / Female With End Cap
$9.99$8.59 -
(5 Pairs) EC5 Bullet Banana Plug Connector Female Male 5mm Bullet Gold Connector
$9.99$7.20 -
15cm Servo Lead Extension (Futaba) 26AWG (5pcs/set)
$1.99
-
(5 Pairs )T-Plug Connectors Male & Female Deans Style w/Shrink Tubing for RC LiPo Battery Pack ESC Electric Engine Motor Parts
$3.20
-
(5 Pairs) Amass XT60 Connectors Male/Female
$6.99$4.59
JET CENTRAL TURBINES
Pilot RC Predator 1.8m ARF PRO PNP
A 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Email us at support@powerboltrc.com for a QUOTE today
Shipping quote included
FEATURES:
- Full composite wing and elevator with fibreglass fuselage
- Two piece wing and two piece stabiliser all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for included servo extension leads
- Pre-installed fibreglass control horns
INCLUDED HARDWARE:
- Complete air frame (including aluminium wing-tubes)
- Pilot-RC electric retracts and electric brakes
- Servo extension leads
- Dual wall tail pipe (for 45-85N turbines)
- 2,000ml fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Plastic air trap UAT
- Pre-prepared pushrods with ball links
*Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.
REQUIRED HARDWARE:
Turbine: 45-85N
Servos: 8 high torque // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
A whole new line of sport jet, designed from the ground up with performance in mind. Capable of both high and low speed flying and manouvers and even options for converting to full 3D no manouver is out of reach for the Predator.
Select one of the several aggressive colour schemes and really stand out from the crowd at your next event.
SPECIFICATIONS:
| Model: | Predator 1.8 |
| Wingspan: | 63″ (1,600mm) |
| Length: | 70″ (1,800mm) |
| Wing area: | 832 “² (5,370cm²) |
| Weight: | 16.28lbs (7.4kg) |
PILOT-RC RECOMMENDED HARDWARE:
- Servos: Pilot-Rc PY08AH (8Kg – 0,095s at 7.4v)
- Servo arms: Pilot-Rc 1,2″ Aluminium arms (included with Pilot-Rc servos)
BUILD MANUAL:
TR(turbine ready) version 1.8m Predator jet with Air trap , fuel tank , tail pipe, Electric retract gear with brake, and hardware. HV servos and hardware. Preinstall the above items.
8pcs Pilot-RC servo , Electric retract gear with brake, servo extension wire, preinstall the above items in factory
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
PILOT-RC RECOMMENDED HARDWARE:
- Servos: Pilot-Rc PY08AH (8Kg – 0,095s at 7.4v)
- Servo arms: Pilot-Rc 1,2″ Aluminium arms (included with Pilot-Rc servos)
BUILD MANUAL:
Aileron: 17mm, Rudder: 25mm, Elevator: 18mm.
Flap: 23mm for take off and 61mm for landing.
The CG is 223mm from the front leading edge on the root of the wing.
NEW COLOR SCHEMES AVAILABLE!
Color scheme 17:
Color scheme 13 – Ferrari:
For other schemes please visit https://pilot-rc.com/jets/predator-jet/predator-1-8m-70/
For Custom or other schemes please email us at support@powerboltrc.com
Related products
-
Pilot RC Predator 3.2m ARF PRO
Request QuoteA 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Email us at support@powerboltrc.com for a QUOTE today
Shipping quote included
FEATURES:
- Full composite construction, lightweight and strong
- Two piece wing and two piece stabiliser all for easy transport
- Three piece fuselage. Rear section easily removable for transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for servo extension leads
INCLUDED HARDWARE:
- Complete air frame (including aluminium wing-tubes and fibreglass control horns)
- Pilot-RC electric retracts and electric brakes
- Servo extension leads and MPX Multi-wire servo/electric retracts/brake plugs. Just one connection per wing.
- Dual wall tail pipe (105mm diameter – for 80-300N turbines)
- 3 in 1 Kevlar tank. 7.800ml fuel tank, 2.400ml smoke tank and 500ml UAT
- Fuel tubing pre-prepared, fuel dot and breather valve
- Pre-prepared pushrods with ball links
- Wing bags
- Smoke pump and injection tube
*Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.
-
Pilot RC Predator 1.8m ARF PRO
Request QuoteA 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Email us at support@powerboltrc.com for a QUOTE today
Shipping quote included
FEATURES:
- Full composite wing and elevator with fibreglass fuselage
- Two piece wing and two piece stabiliser all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for included servo extension leads
- Pre-installed fibreglass control horns
INCLUDED HARDWARE:
- Complete air frame (including aluminium wing-tubes)
- Pilot-RC electric retracts and electric brakes
- Servo extension leads
- Dual wall tail pipe (for 45-85N turbines)
- 2,000ml fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Plastic air trap UAT
- Pre-prepared pushrods with ball links
*Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.
REQUIRED HARDWARE:
Turbine: 45-85N
Servos: 8 high torque // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
-
Pilot RC Viperjet 1.8m ARF or PNP
Request QuoteA 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Email us at support@powerboltrc.com for a QUOTE today
Shipping quote included
FEATURES:
- Full composite construction, lightweight and strong
- Two piece wing and two piece stabilizer all for easy transport
- Painted outside the mold so no seam lines
- Servo operated gear doors
- All live hinging with precision gap sealing
INCLUDED HARDWARE:
- Complete air frame (including aluminum wing-tubes and fiberglass control horns)
- Pilot-RC electric retracts and electric brakes
- Dual wall tail pipe (for 60-100N turbines)
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Air trap UAT
Also available: Turbine Ready version. Includes all the above, plus x9 servos, servo extension leads, all pre-installed. Just add your own turbine of choice.
Also available: PNP version. With ENJET E80 turbine in Turbine Ready version, put your receiver and battery, you can fly.
-
Pilot RC Predator 2.2m ARF PRO
Request QuoteA 50% deposit is required to place an order. Once an order is placed, it may not be cancelled. • Balance in full is due upon completion.
Email us at support@powerboltrc.com for a QUOTE today
Shipping quote included
FEATURES:
- Full composite construction, lightweight and strong
- Two piece wing and two piece stabiliser all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for servo extension leads
- Optional 3D vector thrust pipe
INCLUDED HARDWARE:
- Complete air frame (including aluminium wing-tubes and fibreglass control horns)
- Pilot-RC electric retracts and electric brakes
- Servo extension leads
- Dual wall tail pipe (105mm diameter – for 80-300N turbines)
- All in one fuel tank. 4,600ml Fuel tank + 240ml UAT
- Pre-prepared pushrods with ball links
*Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, all pre-installed and with free wing bags. Just add your own turbine of choice.
REQUIRED HARDWARE:
Turbine size:
- 80-160N for normal sport flying
- 180-260N for 3D vector flight – Avoid high speed high G flying
Servos: 8 high torque (minimum 20kg) // Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Optional: Tail Pipe w/ Vector Thrust +$199.00
PowerBolt RC Batteries
Pilot RC Jets
Reviews
There are no reviews yet.